Different materiels can be used to convey the water from the pump to the fields. Portable systems, with above ground layflat hose as mainlines (1) and submains (3) is a very common solution. Buried PVC pipe as mainlines and submains are sometimes prefered by growers because it's easier to farm around than with surface pipelines.
Note:   (1) = Mainline
           (2) = Control system
           (3) = Submain
           (4) = Tape line

Unroll LayFlat on top of the surface. Do not pull straigth; lay down the LayFlat with some slack in it.

Use barbed fittings(spigot adapters) to connect the hose. Use stainless steel clamps to secure the connections.

Carefully flush the mains before closing it.
To close use a piece of LayFlat as shown.

Use a PLF punch and...

..cut a hole (diam.16 mm) in the Hose

..then...

..then insert the triangular head of the connector Ref H13 into the hole of the Layflat...

...screw  the cap of the H13 to secure the connection.

..don't forget to connect Tape to H13 to be
Ready to Irrigate !!!